The Best 12 Hp Water Pump Submersible 230V

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

Product Description

Ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells to depths of 250′.

From the Manufacturer

This submersible deep well pump is ideal for 4-Inch I.D. or larger wells. It features a built in check valve, 12-GPM and built in suction screen.

Product Description

Ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells to depths of 250′.

From the Manufacturer

This submersible deep well pump is ideal for 4-Inch I.D. or larger wells. It features a built in check valve, 12-GPM and built in suction screen.

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX!

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT ‘Manufacturer Refurbished’.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The well pump submersible is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won’t fulfill that function.

-1 year warranty.

NOTICE: Our pumps are checked for physical damage before they’re shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

Acquaer CJE100 is a 1 HP convertible Jet Pump can be used as shallow well jet pump where depth of the well is 25 ft. and deep well jet pump where depth of well is 26-80 ft.. The pump can run at 115 or 230 volts with the quick change voltage selection switch, and the pressure switch is set to 30 psi on and 50 psi off for high-pressure delivery

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX!

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT ‘Manufacturer Refurbished’.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The well pump submersible is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won’t fulfill that function.

-1 year warranty.

NOTICE: Our pumps are checked for physical damage before they’re shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

Product Description

Flotec, Parts2O, Pentek® Well Pump Control Box, Series: FP217, Heavy Duty, Submersible, 230 V, 60 Hz, 1/2 hp, 3 Wires, NO 4 Maximum Wire, Multiple-Size Electrical Knockouts, 3 in Overall Depth, NEMA 3R Enclosure, Wall Mounting, Standards: UL 778 and CUL Recognized (60 Hz), Fits Pump : 8P4C02S, Induction Run (CSIR) and Capacitor Start / Capacitor Run (CSCR) Applications. For use with 3-wire 4″ submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed.

From the Manufacturer

1/2 hp Control Box that controls the pumps starting and running. This is a three wire model.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 12 Hp Water Pump Submersible 230V, eg:

• What are Top 10 12 Hp Water Pump Submersible 230V for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 12 Hp Water Pump Submersible 230V to buy?
• What are Top Rated 12 Hp Water Pump Submersible 230V to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 12 Hp Water Pump Submersible 230V?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 12 Hp Water Pump Submersible 230V.
• Before deciding to buy any 12 Hp Water Pump Submersible 230V, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 12 Hp Water Pump Submersible 230V and What you should consider when buying the 12 Hp Water Pump Submersible 230V and Where to Buy or Purchase the 12 Hp Water Pump Submersible 230V. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 12 Hp Water Pump Submersible 230V of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 12 Hp Water Pump Submersible 230V.