goldstarkitchen 
Best results for 1/8 diamond drill bit
JOINER 3 mm 1/8" inch Coated Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter for Glass Marble Tile Granite Gemstone Tools Pack of 20Pcs
$11.99
$17.03
Amazon.com
Last update was on: April 27, 2024 2:20 am
- The 3mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
- Hole Diameter : 3mm (close to 1/8")
- Total length : 50mm (close to 2")
- Drill depth: 5mm depth
- Shank diameter:2.35mm ( close to 3/32")
- Drilling speed:Drill a Holes In Seconds
uxcell 1/8-inch 3mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain 10PCS
$6.69
$9.37
Amazon.com
Last update was on: April 27, 2024 2:20 am
- SIZE - 3mm(1/8-inch) Drilling Diameter, 2.5mm(0.1-inch) Shank Diameter.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
- SPECIAL DESIGN - Side open can remove the waste to keep the drill bit clean.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. (Need to be used at a low speed
Bosch GT100 1/8 In. Glass and Tile Bit
$5.89
$8.48
Amazon.com
Last update was on: April 27, 2024 2:20 am
- Three flat shank provides superior grip
- Reinforced head maximizes bit life
- Precision-ground tip reduces bit walking
- Carbide tip for long life in hard materials
- Precision tip - solves bit wander and bit walking
- Available in large sizes offered by no one else (up to 1-Inch). Sold in open stock or in kits
Drilax 3-1/8" Diamond Drill Bit Hole Saw Ceramic Porcelain Tile Glass Marble Granite Quartz Cutting Coated Circular Saw Tip Wet Drilling Core Grit 3 1/8 Inches in (Larger Than 3") Drilax010080
$24.99
$29.74
Amazon.com
Last update was on: April 27, 2024 2:20 am
- Diamond Coated Drilling Holesaw Tool 3 1/8" - Slightly Larger Than 3 inches
- Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite
- Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
- Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
- Circular Shank 3/8" - Can be used with Drilax Diamond Hole Saw Guide
Diamond Coated Drill Bits 1/8" 10 Piece Kit
SUKEO 1/8 Inch Shank Diamond Rotary Grinding Head Burr Drill Bits Sets for Dremel Rotary Tool (pack of 20)
$8.99
$10.16
Amazon.com
Last update was on: April 27, 2024 2:20 am
- MATERIAL: Diamond Grinding Head and Steel Shank.
- WIDELY USE:Diamond Grinding Burr Drill works on stone, glass, metal, hardwood, tile, ceramics, marble, granite and other hard materials.
- MULTIFUNCTION:Suitable for Woodworking,carving,engraving metal polishing and drilling
- COMPATIBILITY:1/8 inch(3mm)shank fit for dremel tool and other rotary tool.
- PACKAGE CONTENT:20 x Diamond Grinding Burr.
30 pcs SET 10 pcs. 1mm 10pcs. 2mm 10 pcs. 3mm Diamond Drill Bit Cylindrical Burr Kit Jewelry Beach Sea Glass Shells Gemstones Lapidary 30pcs. 1 mm 2 mm 3mm (1/8")
$13.95
$16.60
Amazon.com
Last update was on: April 27, 2024 2:20 am
- Set of 30 pcs. Assorted Mixed 1mm 2mm 3mm 10 ea. Diamond Drill Bits - 1/8 shank
- Fits drills, flex shafts and dremels.
- Used by Jewelry Designers for drilling clean holes
- Drills Beach Sea Glass, Sea Shells, Rocks, Marbles, etc.
- Must be used with care submerged in a little pool of water
3-Pack, 1/8" Diamond Core Drill Bits For Glass and Tile | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile
$15.99
$18.87
Amazon.com
Last update was on: April 27, 2024 2:20 am
- FREE Beginner’s Drilling Instructions. Easy to use.
- FREE shipping in the US. No risk - 100% Money Back Guarantee
- This set contains 3 new 1/8” diamond core bits for glass. They fit your drill, drill press or Dremel tool
- EASY - Use your kitchen scrubbing sponge to hold the glass and cool the bit. We’ll show you how.
- You'll drill glass, ceramic tile, porcelain, wine bottles, ceramics, and stone.
TEMO 30pcs 1mm (1/32 inch) Coarse Diamond Coated Burrs Glass Drill Bit Set Grit 80 with 1/8 inch (3mm) Shank fit Dremel and Compatible Rotary Tools
Amazon.com
Last update was on: April 27, 2024 2:20 am
- New one box set of 30 pieces diamond coated burrs with pointed heads in box set.
- They will fit your hand drill, drill press & your Dremel and Foredom tool with a 1/8" collet. Shank diameter : 3.17mm (1/8 inch)
- diamond drill bits in a coarse grit, for drilling glass, shells, tile and stone.
- Overall length is 40mm (1-5/8 inch)
- They will fit your hand drill, drill press & your Dremel and Foredom tool with a 1/8" collet. Premium type diamond coated in GRIT 80 (coarse). Suitable for glass, marble, rock or jewelry.
Masonry Drill Bits, ZINMOND 10 Piece Tile Drill Bits Set,Glass Drill and Concrete Drill Bit, Tungsten Carbide Material Drill Bit for WALL, BRICK, MARBLE, PLASTIC, WOOD, MIRRORS, CINDER BLOCK,etc.
$14.99
$17.99
Amazon.com
Last update was on: April 27, 2024 2:20 am
- 【SATISFY ALL YOU DEMAND】:Package includes 10 Pcs drill bit set with 6 different sizes: 1/8" (3 INCH LENGTH - 2 INCLUDED), 1/4" (4" LENGTH - 2 INCLUDED), 1/4" (6" LENGTH - 2 INCLUDED), 5/16 (6" LENGTH), 3/8" (6" LENGTH - 2 INCLUDED), and 1/2" (6" LENGTH).Suitable for most general purpose bench drill, electric drill and drilling machine with drilling function.
- 【UNIQUE DESIGN】: One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly.
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$12.23
$17.12
Amazon.com
Last update was on: April 27, 2024 2:20 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
10 Piece Masonry Drill Bits Set (TILE, BRICK, CEMENT, CONCRETE, GLASS, PLASTIC, CINDERBLOCK, WOOD) Chrome Plated with Industrial Strength Carbide Tips – BONUS STORAGE CASE INCLUDED
$15.97
$23.64
Amazon.com
Last update was on: April 27, 2024 2:20 am
- MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!
- DURABLE INDUSTRIAL GRADE CARBIDE TIPS - Carbide Tipped Drill Bits Are Built For Longevity and Will Stay Sharper Much Longer Than You're Typical Steel Drill Bit
- CONVENIENT STORAGE CASE - Keeps Your Masonry Drill Bits Safe & Organized in a Rust-Free Hard Plastic Container
Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"
$39.99
$53.59
Amazon.com
Last update was on: April 27, 2024 2:20 am
- Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
- Best value set in durable zipper case. Great gift idea for any DIY lover.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
- Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.
