goldstarkitchen 
Best results for drill bits for stainless steel best
Migiwata 1/4 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 10pcs – Jobber Length and Straight Shank – Extremely Heat Resistant – Suitable for Drilling in Stainless Steel and Iron
$18.99
$25.07
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Cobalt Steel - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12
$15.05
$19.57
Amazon.com
Last update was on: November 22, 2024 1:55 am
- JOBBER LENGTH: 1/8-Inch cutting diameter, 1-5/8-Inch flute length, 2-3/4-Inch overall length, 135 degree split point, straight shank
- MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits
- CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs)
$34.89
$38.38
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- 3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.
- This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron
$14.99
$18.14
Amazon.com
Last update was on: November 22, 2024 1:55 am
- COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant
- for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
- NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
DEWALT Cobalt Drill Bit Set with Pilot Point, 14-Piece (DWA1240)
Best Choice 8-Piece 1/2” Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16” – 1” by 1/16th Increment
$27.99
$31.35
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Premium cobalt high speed steel construction for proven capability and durability to drill holes in wood, plastic, aluminum, copper, stainless, sheet metals and many other types of materials
- Superior gold titanium and black nitride dual coating finish holds up lubricant better for smoother drilling, and is 80% more durable and corrosion resistant than regular black enamel finish
- 135° Split point design at tip increases cutting speed with self-centering feature and prevents drill walking or wobbling
amoolo Twist Drill Bit Set (13 pcs), M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron, 1/16"-1/4"
$13.89
$18.61
Amazon.com
Last update was on: November 22, 2024 1:55 am
- 【M35 Cobalt Drill Bit】This drill bit contains 5% Cobalt (M35 Cobalt HSS), which increases the strength, the tool life and makes it more heat-resistant. Rockwell Hardness >
- = 67.
- 【Fully Ground Process & 135° Split Point】No center punch is needed. Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster.
COMOWARE Cobalt Drill Bit Set- 15Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Indexed Storage Case, 1/16"-3/8"
$19.99
$24.99
Amazon.com
Last update was on: November 22, 2024 1:55 am
- HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong
- TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.
- PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
SPKLINE 10 Pcs High Speed Steel 1/8 Inch Cobalt Drill Bit Set 3.2mm (1/8") Jobber Length Twist M35 Metal Drill Bit For Stainless Steel And Hard Metal Drill Bit Set
$7.99
$9.67
Amazon.com
Last update was on: November 22, 2024 1:55 am
- 10 pcs 3.2 mm (1/8") cobalt drill bit set for precise hole drilling into various material. Total 65 mm long with 35 mm working length
- Very tough drill bit for heavy duty work drilling into stainless steel, light-gauge metal, high-carbon steel, aluminum and alloy steel, cast iron, abrasive alloy metal, other hard metal and hardened steel. 4 times life time than normal metal drill bit when drilling into PCB board, plastic, wood, jewelry, sheet metal and normal steel
Drill America 29 Piece Heavy Duty High Speed Steel Drill Bit Set with Black and Gold Finish in Round Case (1/16" – 1/2" x 64ths), KFD Series
$49.99
$60.49
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
- Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
- Comes in a plastic storage case
set of 3 HSS6542 M2 Steel Spiral Groove Step Drill Bit Set for Stainless Steel Metal Wood Hole
$26.31
$34.20
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Suit for use in hardness under 28 artifacts,(Such as: Stainless steel , iron plate, aluminum, wood )
- You can use water to cooling it when it is work and it can be used for even longer
- Meet Your Demands - With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for metal wood plastic countersunk. Suitable for Home DIY, and General Building Engineering Use.
Driak 3 Pics HSS6542 M2 steel Spiral Groove Unibit Step Drill Bit Set for Stainless Steel Wood
$25.51
$33.42
Amazon.com
Last update was on: November 22, 2024 1:55 am
- 3 Pcs/set HSS6542 Spiral Groove Step Drill Bit for Stainless Steel Cutting
- You can use water to cooling it when it is work and it can be used for even longer
- You can use one drill for diferent aperture
- No need of center punch.Compared with the ordinary twist drill,it is not easy to break and it can be used for deburring, chamfering and open hole
- Recommend the drilling speed of 250--400 rpm
CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers
$21.88
$32.16
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
- Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
- Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
Bosch CO2139 3/16 In. x 3-1/2 In. Cobalt Drill Bit
$4.22
$6.08
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Drill America 1/4" x 12" Cobalt Aircraft Extension Drill Bit, GLBCO Series
$14.43
$18.18
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium
- 135° split point tip prevents drill from walking
- Round shanks allow use with a wide variety of tool holding systems
- Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools
- performance is similar to uncoated tools
- 12" overall length for drilling where extra length for reach is required
Bosch CO14B 14 Pc. Cobalt M42 Drill Bit Set
$32.98
$40.57
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum
- Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits
- High-heat resistant bits – withstand high-temperature applications for extended periods of time
BOSTAL 21PCS Drill Bit Set 1/16 to 1/4 5/16 3/8 1/2 Professional Twist Drill Bits for Stainless Steel, Steel Wood Plastic Aluminum Alloy
$18.00
$21.60
Amazon.com
Last update was on: November 22, 2024 1:55 am
- No spin shanks and135-degree split-point reduces slip and walking, titanium Coating for greater wear protection and long life
- Industry grade HSS Material drill bit set: industry grade High Quality High Speed Steel, High hardness, good wear resistance and durability.
- Super performance: Bostal Drill is one professional OEM Factory for famous brand
- High quality drill bits is prime. Perfect Suitable for drill holes in stainless steel, wood, alloy steel, nonferrous metal, cast iron and hard plastics.
Champion Cutting Tool Brute Platinum Twister-XL5 29 Piece 1/16"-1/2" x 64ths HSS Jobber Drill Bit Set-135 Deg Split Point, Water Resistant Index-MADE IN USA
$84.99
$113.04
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Drill 3x Longer (than competitors drills), Drill 2x Faster (than cobalt), Drill Accurate (135 deg split point, tapered web geometry)
- Better than cobalt-XL5 is able to flex when cobalt drills chip or snap
- Premium high speed steel and NOMO surface treatment for longer tool life, fast penetration, and flexibility
- Self centering 135 degree split point prevents drill from walking
- Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials
Bosch CO2147 5/16 In. x 4-1/2 In. Cobalt Drill Bit
$5.42
$6.34
Amazon.com
Last update was on: November 22, 2024 1:55 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
