goldstarkitchen 
Best results for best micro milling machine
JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine
SUNWIN Metal Mini Milling Machine Micro DIY Woodworking Power Tool for Student Hobby
$219.00
$251.85
Amazon.com
Last update was on: November 23, 2024 2:35 am
- This tool is a milling cutter, milling machine, milling cutter and the side of the front blade, has certain risk, so be sure to use under the guidance of professional personage
- Machine main parts: such as the spindle, the tailstock, pedestal, slider, motor blades, connection piece, gear adopts full metal structure
- Motor Speed: 20,000rpm
- Headstock speed: 2,000rpm
- Support power: 12VDC/2A/24W
Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench
$44.97
$62.51
Amazon.com
Last update was on: November 23, 2024 2:35 am
- Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal
- Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece. Drill Depth- 2 Inches
- Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow's Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
BobsCNC E3 CNC Router Engraver Kit with the Router Included (450mm x 390mm cutting area and 85mm depth of trave)
Mini Multipurpose Machine 6 in 1 DIY Tool Kit Wood Metal Lathe Milling Drilling
$179.00
$211.22
Amazon.com
Last update was on: November 23, 2024 2:35 am
- The Mini Metal Lathe is a tool for DIY,hobby,modelmaking,crafts,students,small parts processing and others.
- Saw blade is special designed, only 4mm cam short trip, which will protect human skin from injury.
- Fix the machine on the board or other table. Shot off the power when not use.
- Wear protect goggles when operating the machine.
- Total weight: about 4.5KG
WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper
$1,042.64
$1,355.43
Amazon.com
Last update was on: November 23, 2024 2:35 am
- Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
- 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
- Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
- Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
Proxxon 34104 Mill/ Drill Head PF 230, 1.38 X 15.75-Inches
$835.00
$926.85
Amazon.com
Last update was on: November 23, 2024 2:35 am
- Precision proxxon engineering for top quality machinery
- 110 - 120V, 60Hz, 140W (0.1877hp), speeds 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm
- The lathe functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively
- Three collets of sizes 15/64" - 5/16" and 25/64" (6, 8, 10mm) are included.
SPTA AC110-230V Mini Electric Grinder Set/Mini Handle Electric Drill Grinding Machine Engraving Pen Milling Trimming Polishing Drilling Cutting Engraving Tool Kit Pack of 33Pcs
$19.99
$26.59
Amazon.com
Last update was on: November 23, 2024 2:35 am
- SPTA AC110-230V Mini Electric Grinder Set/Mini Handle Electric Drill Grinding Machine Engraving Pen Milling Trimming Polishing Drilling Cutting Engraving Tool Kit For Dremel Pack of 33Pcs
- ✔ 【VARIETY OF ACCESSORIES】 33 pieces package includes 1x rotary tool, 3x wool felt grinding heads, 2x diamond coated burr head, 3x sanding bands, 1x 22mm Hss Saw Blade, 3x hand drill bits, 5x collets,2x 1/8" shank mandrel,4x aluminium oxide grinding stone Burr and 1x Sanding Drum. Perfect rotary kit for cutting, grinding, polishing, deburring, removing, drilling and more.
SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank
$14.99
$16.64
Amazon.com
Last update was on: November 23, 2024 2:35 am
- ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
- ➤Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
- ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- ➤Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing. ONE YEAR WARRANTY covered.
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$114.46
Amazon.com
Last update was on: November 23, 2024 2:35 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
DRILLPRO 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8” Shank
$16.99
$25.15
Amazon.com
Last update was on: November 23, 2024 2:35 am
- Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.
- High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
- Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
- Cutting Edge Length: 12mm. Overall Length: 37mm. Quantity: 1set (10 pcs)
