goldstarkitchen 
Best results for pro cut drill press
Hole Pro X-305 1-7/8″ to 12″ TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
$159.95
$175.95
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Twin blades for faster/smoother cutting, strong shield traps dust &
- controls cutting depth
- User replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
- Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
- 14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
- Complete kit - add your 1/2" drill chuck - Needs ¼ power of hole saws so bigger holes easily cut
PRO Driller Tool – Straight Axle Holes – 2.5 Degree Axle Holes – Raised Wheel Hole
$21.95
$27.00
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Drill Axle holes to create perfectly straight or 2.5 degree angled axle holes so your car is fast.
- Drill new axle holes or drill into existing pine car derby axle slots using our exclusive View Port.
- Drill 2.5 degree angled axle holes to cant your axles to reduce friction – less friction, faster speed!
- Drill a "raised wheel" axle hole to reduce friction further. This proven technique WILL make your car faster.
HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use ¼ Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER
$49.95
$67.43
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Replaceable HSS Blades SKU HP1183 ASIN B07GY3Z25P
- Twin blades for perfect balance – no bars to change or threads to break off
- Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
- 11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
- Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
Diamond Drill Bit Set, DRILLPRO 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm – 30mm
$8.39
$11.49
Amazon.com
Last update was on: November 22, 2024 4:06 am
- SMALL RESISTANCE: Small incision resistance, opening speed is quickly, easy removal of chips and other advantages.Also help to open accurately. Large chip holes to ensure that when the punching smooth, punching accurate.
- DURABLE: Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole.
DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece
Drilax ® 10 Pcs Diamond Drill Bit Set 5/32", 3/16", 1/4", 5/16", 3/8", 1/2" , 5/8" , 3/4" , 7/8" , 1" In Inch Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps 100425
$19.95
$27.53
Amazon.com
Last update was on: November 22, 2024 4:06 am
- GREAT SET with 10 Mostly Used Sizes: from 5/32" in to 1 inch
- HUGE COST SAVINGS compared to big box stores. Use with standard electric or battery drillers.
- There is no need for a center pilot drill. These tools do not have center pilot drills. Use a guide
- Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles
- FOR ALL DRILLS - HAND - PORTABLE - UPRIGHT - Shank sizes vary, maximum shank is 3/8
Paper Cutter A4 12 Inch Titanium Paper Trimmer with Automatic Security Safeguard Guillotine for Coupon, Craft Paper, Label and Photo (Black-1)
$10.22
$13.08
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Professional Guillotine: Present the clean straight cutting along printed line. No drag! And easy to replace the blade when it become blunt.
- Size and Materials: Design to cut A3,A4,A5 Paper, Photos, Cards, Laminated Stuff (within 1.5mm) and more. Max cut 12 sheets paper (80g/m2) every time. Cut a little lesser prolongs blades' service life better.
- Accurate Measurement: With 45-degree to 90-degree angle measuring plate and cm/inch scale. Ensure to trim the angle and length you wanted.
Drilax™ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"
$39.99
$44.79
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
- Best value set in durable zipper case. Great gift idea for any DIY lover.
- There is no need for a center pilot drill. These tools do not have center pilot drills.
- Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
- Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.
Hollow Punch Set for Drills and Drill Presses, Pack of 6
SKIL 4395-01 5.5 Amp Orbital Jig Saw
Diamond Hole Saw – 15 pcs Diamond Drill Bit Set Extractor Remover Tools for Glass, Ceramics, Porcelain, Cermic Tile (1/4"-2")
$13.86
$19.13
Amazon.com
Last update was on: November 22, 2024 4:06 am
- 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
- 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life.
Wilton 11674 4-Inch Industrial Drill Press Vise
$63.39
$86.84
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Precision Machined On For Accurate And Versatile If Usage On The Base, Sides And End
- Durable Construction With Fine Grain Cast Iron Castings And Hardened Steel Jaws
- Precision Ground For Square And Parallel Accuracy To ±.0001 Per Inch
Hole Pro X-230+ 1-7/8" to 9-1/4" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
$143.95
$184.26
Amazon.com
Last update was on: November 22, 2024 4:06 am
- TWIN BLADES for balance – NO BALANCE BARS to BREAK and finer kerf than with SINGLE Blade models
- CUT HOLE 1-7/8" to 9-1/4" in ceilings, walls, floors - Cut Depth control
- UNIQUE 5/8” threaded shaft tip to QUICKLY MOUNT CARBIDE GRIT holes saws
- Sturdy Carry Case and replaceable blades: Cut plywood, sheetrock, plaster, veneers, cement board, ceiling tiles, T&G
- LIFE TIME warranty see details under IMPORTANT Information section
Jet 708580 JBM-5 1/2 Horsepower Bench Mortiser
DELTA 20-621 4-Inch Drill Press Vise
TACKLIFE Circular Saw with Metal Handle, 6 Blades(4-3/4" & 4-1/2”), Laser Guide, 5.8A, Max Cutting Depth 1-11/16” (90°), 1-3/8” (0°-45°), Ideal for Wood, Soft Metal, Tile and Plastic Cuts – TCS115A
$79.97
$102.36
Amazon.com
Last update was on: November 22, 2024 4:06 am
- ➤METAL HANDLE & LASER DEISGN: Comes with an unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. The laser guide ensures a professional and precise cutting line, convenient for cutting.
- ➤POWERFUL MOTOR & 6 BLADES: Features a 5.8 Amps copper motor to deliver full-size performance at 3,500 rpm, making cut wood, plastics, plaster board, PVC pipe, tile with ease. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
Souber DBB Lock Mortiser
IRWIN Titanium-Nitride Coated Metal Index Drill Bit Set with Case, 29-Piece, 3018003
$131.55
$153.91
Amazon.com
Last update was on: November 22, 2024 4:06 am
- Titanium-coated nitride drill bits last longer and feature a cutting edge that stays sharp
- 135° split-point tip starts drilling immediately and helps eliminate walking
- IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses
- Includes 1/16" through 1/2" drill bit sizes in 1/64" increments
- Titanium nitride coating extends cutting edge life up to 6x
EZ HOLE Professional Hole Saw Cutter with Full
$158.77
$187.35
Amazon.com
Last update was on: November 22, 2024 4:06 am
- FULL LIFETIME WARRANTY - The last hole cutter you'll ever need to buy.
- CUTS HOLES WITH EASE - Ideal for plywood, drywall, plaster, etc. *Not for wood siding or uneven surfaces.
- HEAVY DUTY - Carbide cutting blade, all metal jig, sealed ball bearings, and an ABS dust shield
- COSTS LESS - This kit can replace an entire hole saw set from 1-3/16" to 8-5/8" for much less
- REPLACEABLE BLADE & BIT - Inexpensive tungsten carbide replacement blades and pilot bits readily available
Dremel 225-01 Flex Shaft Attachment
$24.97
$36.71
Amazon.com
Last update was on: November 22, 2024 4:06 am
- The product is Moto Tool Flex Shaft
- Comfort grip hand piece allows finger tip control to cut, grind, sand, sharpen, polish and more
- Integrated shaft lock button on the hand piece allows for easy accessory changes
- Quick connect - easily attaches to your Dremel rotary tool
- More flexible cable - provides more comfort during use.
- For use with rotary tool models 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 4200, 3000, 8220
