goldstarkitchen 
Best results for chart for drill and tap sizes
Screw Chek’r SAE/ Inch Screw Thread Size Gauge (No. 1 to 5/16) 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA
$15.05
$22.27
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 1 through 5/16 inch in NC, NF, and NS pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Woodstock D4141 Drill-Gauge Set, 3-Piece
Viking Drill and Tool by Norseman 43550 Type 240-B Bright Finish 118 Degree HSS Drill Set (115 Piece)
$227.48
$295.72
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- 115 pc Set High Speed Steel Bright Finish Jobber - General Purpose 118-Degree Point
- 1/16 - 1/2 by 64ths, #1 - #60, A - Z 118-Degree Point
- High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials
- Bright finish increases chip flow in softer materials such as aluminum, wood and plastic
- Spiral flutes with a higher flute angle to remove chips more easily
Nut & Bolt Thread Checker (Inch & Metric)
$27.30
$31.40
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Each size has a nut and bolt checker on the same gauge. 26 male/female gauges - 14 inch & 12 metric.
- Thread sizes are permanently stamped onto each gauge (inch in red, metric in white)
- Inch gauges are clear zinc plated, metric gauges are black oxide.
- The individual gauges rotate freely on the wire cable for fast thread verification
- Wire cable with loop for convenient hanging
uxcell Metric Hand Tap M12 Thread 1.5 Pitch 4 Straight Flutes H2 Alloy Tool Steel 1 Pair
Irwin Tools3018002 Cobalt M-35 Metal Index Drill Bit Set, 29 Piece
uxcell Machine Tap 9/16-12 BSW Thread Pitch H2 4 Straight Flutes High Speed Steel
$13.31
$18.10
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Thread Size: 9/16-12 BSW
- Shank Side Width: 9mm / 0.35 inch
- Thread Length: 32mm / 1.26 inch
- Material: HSS (High Speed Steel)
- Total Length: 95mm / 3.74 inch
- Straight 4 flutes are ground to provide rapid chip removal for efficient threading.
Stainlesstown Nut Bolt Thread Gauge (Blue)
$8.95
$10.11
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Measures diameter, thread pitch & length of nuts, bolts & screws
- Measures fractional bolts from size #4 to 1" up to 7" long
- Measures metric bolts & screws from size 3mm to 22mm
- Made of very durable 1/4" thick hard plastic
- 1/4" thick x 8-3/4" Long x 3-3/8 Wide
Screw Thread Gauge | Metric and SAE | Recommends Drill Bit & Tap Size (BCP675)
$8.95
$11.37
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Quickly and accurately determine the screws size
- Recommends the drill bit or tap size needed for the screw
- Standard & Metric
- Constructed of thick hard plastic for lasting durability
- Smooth easy to clean surface that resists oil and grease
Atlas Press Co Decimal Equivalents Chart Machinist Lathe Tool Shop Poster
Marine Bolt Supply Nut, Bolt & Screw Gauge Standard & Metric Coarse & Fine Diameter, Length & Thread Pitch (Red)
Engineering Slide Chart – Screw Data Selector
$29.99
$37.19
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- The Ultimate Engineering Screw Chart - NEW VERSION
- Includes technical information from many of the quick references that are commonly found in the work areas of designers, engineers, and machinists.
- All of this information is compiled for both English (Imperial) and Metric systems in a single screw chart. MADE IN THE USA.
- A “MUST HAVE” for Engineers, Designers, Drafters, and Machinists
Screw Chek’r SAE/Inch Screw Checker (No. 4 to 1/2) 1/8 Inch Heavy Gauge Steel Screw Checker, Made In USA
$16.54
$24.31
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do it yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for sizes ranging from No. 4 through 1/2 inch in the UNC and UNF pitches. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
Scotch Mounting, Fastening & Surface Protection 314 783961045463 Scotch Indoor Mounting Tape, 1-Inch x 125-Inches, 1-Roll (314P), White
$4.28
$6.21
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Delivers a strong, permanent bond on contact
- Holds up to 10 lbs. with 40” / (1 lb. per 4" of tape)
- Easy-to-apply design with no mess or tools
- Ideal for use on finished/painted surfaces, metal, tile and more
- Intended for indoor use only
Boltsize-It Gauge, Blue
$9.41
$11.39
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Quickly and easily size bolts, screws, nuts and twist drills
- Features ruler marked with inches and millimeters
- Gauge metric hex nuts and washers by holding under metric holes
- Resists water, alcohol, oil and grease
- Made of hard plastic
Metric Screw Checker (2mm to 7mm) – Made in USA
$14.95
$18.54
Amazon.com
Last update was on: November 22, 2024 5:31 pm
- Say goodbye to frustration with this easy to use, pocket sized tool. Do-it-yourselfers, handymen, and mechanics can save time and money by accurately identifying different types of screws the first time. This tool gives all the information needed to properly identify machine screws, wood screws, sheet metal screws, bolts, and even cotter pins and rivets.
- Identifies diameter, size, pitch, and length, with a tap drill chart for metric screws from 2mm to 7mm. This tool can also be used to straighten bent screws and clean dirty or rusty threads.
