goldstarkitchen 
Best results for 3.3v to 5v buffer
ALITOVE 100pcs WS2812B Addressable 5050 smart RGB LED Pixel light on Black Heat Sink PCB Board for Arduino 5V DC
$14.88
$18.30
Amazon.com
Last update was on: October 31, 2024 6:43 am
- The ultra bright ws2812b smart full-color LED pixel is individually addressable. It has 256 brightness display and full 24-bit (16,777,216) color display. You can set to any color or animation.
- It’s put on a small PCB board that allows you to solder it in whatever configuration you want.
- It’s easy to wire up and control. You just need one digital pin plus 5V and ground to control as many LEDs. The chainable design means no crossed threads.
DIYmall 0.96" Inch Blue I2c IIC Serial 128×64 OLED LCD LED Display Module for Arduino 51 Msp420 Stim32 SCR
$8.99
$12.77
Amazon.com
Last update was on: October 31, 2024 6:43 am
- The screen is made in Taiwan, quality is much better. Compatible with MMDVM，Pi-Star, and it works with raspberry pi. https://tech.scargill.net/ssd1306-with-python/
- Document link:https://drive.google.com/open?id=1qkexPET5MUICAarGOtlnQk4F-JEKkrHZ
- The IIC address can be changed,it is convenient to use with different machines
- Four square holes are easy to install
- What you will get is : 1 X 0.96inch oled module blue.
HiLetgo CP2102 USB 2.0 to TTL Module Serial Converter Adapter Module USB to TTL Downloader With Jumper Wires
$5.19
$5.76
Amazon.com
Last update was on: October 31, 2024 6:43 am
- Stable and reliable chipset CP2102
- Baud rates: 300 bps to 1.5 Mbps
- Connect MCU easily to your computer!
- Standard USB type A male and TTL 5pin connector. 5pins for 3.3V, RST, TXD, RXD, GND & 5V
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
diymore 2pcs CP2102 USB 2.0 to TTL UART 6Pin Serial Converter with Cables Support Windows 2000/XP OS9 for Arduino
FTCBlock 2pcs CP2102 USB to TTL Serial Converter Adapter Module USB to TTL (CP2102)
Amazon.com
Last update was on: October 31, 2024 6:43 am
- This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!
- Uses CP2102 chipset and has a standard 0.1" pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU
- TTL interface output, easy to connect to your MCU. Status LED
- Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40. Size: 42mm X 15mm (approx) .
RobotDyn – Nano V3 Ethernet Network Shield – ENC28J60 Module for use with Arduino Nano
$9.47
$13.45
Amazon.com
Last update was on: October 31, 2024 6:43 am
- For Arduino IDE: Use the Ethernet library EtherCard.h to write sketches which connect to the internet using the add-on module
- The Nano Ethernet Shield is based on the ENC28J60 Ethernet chip which provide a network (IP) stack capable of both TCP and UDP
KEDSUM® CP2102 Module STC Download Cable USB 2.0 to TTL 6PIN Serial Converter For STC
$8.99
$11.60
Amazon.com
Last update was on: October 31, 2024 6:43 am
- USB specification 2.0 compliant with full-speed 12Mbps. Connect MCU easily to your computer
- Stable and reliable chipset CP2102
- Baud rates: 300 bps to 1.5 Mbps
- TTL interface output, easy to connect to your MCU. Status LED
- Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
ubld.it MIDI Breakout Board
MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit
$9.99
$14.69
Amazon.com
Last update was on: October 31, 2024 6:43 am
- This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration.
- When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums.
RobotDyn – Micro SD Card high Speed Reader/Writer Module. 3.3V/5V Universal, for 3.3V and 5V Logic. for use Micro SD and MMC Card with Arduino (1 PC – Micro SD Card high Speed Reader)
KNACRO LSM6DS3 Module 6 Degrees of Freedom Breakout IIC/SPI Transfer Digital Sensor Vibration sensor Acceleration sensor
$9.60
$13.44
Amazon.com
Last update was on: October 31, 2024 6:43 am
- The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 we’ve created this small breakout board just for you!
- Each LSM6DS3 Breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DS3 Breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature!
Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board [ADA1899]
$19.29
$23.73
Amazon.com
Last update was on: October 31, 2024 6:43 am
- HTU21D-F Temperature & Humidity Sensor Breakout Board
- i2c digital interface (7-bit address 0x40)
- 3.3V voltage regulator and i2c level shifting circuitry on board
- Operating Voltage: 3.3 to 5V (Power and logic level)
- Dimensions: 18mm x 16mm x 2mm / 0.7" x 0.6" x 0.08" Weight: 1g
