goldstarkitchen 
Best results for older craftsman table saw
Older Sears/Craftsman Band Saw Zero Clearance Insert 3-3/8" diameter x 3/32" thick – 3 Pack
$9.99
$12.89
Amazon.com
Last update was on: November 25, 2024 2:14 am
- Reduce splintering and tear out on your stock pieces
- Prevent small pieces from falling down in between your blade and the lower wheel
- Replace your old worn out stock insert
- Perfect for scroll work, small delicate pieces, or woods that are prone to tearing out
- This insert comes in packs of 3
POWERTEC 71005 Deluxe Table Saw Miter Gauge
Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert
$22.99
$33.11
Amazon.com
Last update was on: November 25, 2024 2:14 am
- The Vintage Craftsman insert is blank so you can custom fit the blade slot by passing your blade through it.
- Helps to prevent tear out made from high-density phenolic laminate with a bonded-melamine surface
- Includes side and end adjustment screws
- pre-cut blade bottom pocket
- 14 3/8" X 3 3/4" X 3/32" thick
- Please CHECK the Length, Width and Thickness of your insert before ordering
POWERTEC 70132 14-Inch Table Saw Dust Hood
$12.99
$18.06
Amazon.com
Last update was on: November 25, 2024 2:14 am
- Effectively seals, ensuring optimum air quality and shop cleanliness
- Easily and firmly secures to most of the table saws on the today's market
- Outer size: 14-1/16" x 14-1/16"
- Outlet diameter: 4"
- Flange: 3/4" wide
- Tough, durable ABS plastic material
Superior Electric SW7B Aftermarket On-Off Toggle Switch 2 Prong For Table Saws and Drill Press Replaces Delta 489105-00 Switch
New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC
MJ SPLITTER SteelPro TK
$39.00
$54.99
Amazon.com
Last update was on: November 25, 2024 2:14 am
- America's most popular aftermarket table saw splitter for preventing kickback (for thin kerf saw blades only)
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Automatic Kerf Keeper prevents reactive wood from binding on the saw blade
- Simple instructions and installation drill guide included
UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs, Fixtures or Miter Slots (size 3/4" x 3/8"). Slick Durable Material Slides with Ease. Ideal for Table Saws, Router Table and Bandsaws (2 UHMW Bars)
$19.99
$28.19
Amazon.com
Last update was on: November 25, 2024 2:14 am
- ???????? The idea behind using UHMW material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics. This makes it ideal for sleds where repetitive sliding happens regularly
- ???????? Its also very slick in comparison to wood and other plastics. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove.
POWERTEC 71006 SAFETY Locking Switch
Craftsman STD580025 Woodruff Key, 2-Pack Genuine Original Equipment Manufacturer (OEM) Part
Amazon.com
Last update was on: November 25, 2024 2:14 am
- This part is compatible with models including
- 917254244,536918300,917254245,536918301,536918302,917992960,13169888,143206-565,502256136A,604222,917259940,9FB (201010 - 201999),502254690,502254210,502254211,113298240,917270712,917288032,917288033,917288030,917288031,917270711,917270710,917278230,917254242,917254243,917254240,917254241,S252653,842242560,143205-544C,113299120,53682242,10324260,53682240,53682241,917254271,917254272,917254270,917254273,917255121,917254274,917255120,91725510A
Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert (Colors may vary)
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.34
$44.90
Amazon.com
Last update was on: November 25, 2024 2:14 am
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Grizzly G2535 Single-Phase Motor with 3450 RPM
$250.95
$336.27
Amazon.com
Last update was on: November 25, 2024 2:14 am
- All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market.
- Size: 1-1/2 hip
- Type: Enclosed
- Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines.
Sears 9-10" Flat End Zero Clearance Table Saw Insert by Peachtree Woodworking PW951
Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc
$49.99
$59.99
Amazon.com
Last update was on: November 25, 2024 2:14 am
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
Delta Uni-Saw Contractor Large Grizzly Phenolic Zero Clearance Insert for Table Saws 13-3/8” x 3-3/4” x 1/2”
$24.99
$28.49
Amazon.com
Last update was on: November 25, 2024 2:14 am
- Insert Dimensions: 13-3/8” x 3-3/4” x 1/2”. Actual Color May Vary
- Made from high-density phenolic laminate with a bonded-melamine surface
- Delta Uni-Saw/Contractor/Large Grizzly insert fits various models of table saws.
- Includes leveling screws, side and end adjustment screws
- rear safety tab
- pre-cut blade bottom pocket
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade
Amazon.com
Last update was on: November 25, 2024 2:14 am
- Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick
- For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,500
- Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood.
- Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
Craftsman 10" Contractor Table Saw Metal Handwheel Handle Crank 3/8" Tilt or Elevation Shaft
$39.99
$57.19
Amazon.com
Last update was on: November 25, 2024 2:14 am
- 4 1/2" diameter handwheel, fits 3/8" shaft. Used on the blade elevation and tilt shafts.
- Fits Older Model Craftsman 113.xxxxxx model series belt drive table saws with 3/8" diameter tilt and lift shafts.
- This handwheel can be used to replace original handwheels part numbers 37835, 6579, and146.
