goldstarkitchen 
Best results for craftsman table saw blade insert
Craftsman 21833 Table Saw Zero-Clearance Insert CR-4
$33.24
$36.56
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- LEECRAFT Model Number CR-4
- Fits Craftsman 21833, Grizzly G0715P, Dayton 4KXD1, Masterforce 240-0036 table saws
- 15-1/8" x 4" x 1/8" thick with pre-milled blade, dado and riving knife slot
- Precision machined from melamine faced high density phenolic laminate
- Installation instructions included
Sears 9-10" Flat End Zero Clearance Table Saw Insert by Peachtree Woodworking PW951
Fulton Woodworking PW952 Vintage Sears Craftsman Phenolic Zero Clearance Table Saw Insert
$22.99
$31.04
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- The Vintage Craftsman insert is blank so you can custom fit the blade slot by passing your blade through it.
- Helps to prevent tear out made from high-density phenolic laminate with a bonded-melamine surface
- Includes side and end adjustment screws
- pre-cut blade bottom pocket
- 14 3/8" X 3 3/4" X 3/32" thick
- Please CHECK the Length, Width and Thickness of your insert before ordering
MJ SPLITTER Table Saw Safety Splitter and Riving Knife Alternative for Zero Clearance Insert
$20.00
$29.80
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Popular aftermarket table saw splitter for preventing kickback on table saws (for Thin Kerf Saw Blades Only)
- Voted Best Tool by Popular Woodworking (2004) for Table Saw Safety!
- Installs directly to wood or plastic Zero Clearance Inserts (Throatplates)
- Mini-featherboard technology keeps the workpiece against the fence and prevents burning
- Simple instructions and installation drill guide included
Band Saw Table Inserts Solid Aluminum 2-1/2" X 3/32" 2 Pack Fits DELTA ROCKWELL
ZEROPLAY Miter Bars by MICROJIG (Double Pack)
$33.72
$44.51
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Hassle-free miter bars using One-Touch Calibration
- No slop, side-to-side play or seasonal warping
- Top-down installation for easy and fast mounting to jigs, fixtures and sleds
- Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks
- Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
- For T-Track Miter Slots Only
DEWALT DW4856 Metal/Woodcutting Reciprocating Saw Blade Set, 6-Piece
$9.99
$14.19
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Metal
- Imported
- Combination set provides a selection of blades for common applications
- Compatible with all reciprocating saw brands
- Ideal for use with metal, plastic, wood, and drywall
- Set includes six (6) reciprocating saw blades
DEWALT DW3106P5 60-Tooth Crosscutting and 32-Tooth General Purpose 10-Inch Saw Blade Combo Pack
$32.43
$41.19
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Tougher tungsten carbide stays sharper longer
- Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.
- Computer-balanced plate reduces vibration for improved accuracy and better finish
- Durable tungsten carbide maintains true edge
- Best used for miter saw and slide miter saw jobs
Older Sears/Craftsman Band Saw Zero Clearance Insert 3-3/8" diameter x 3/32" thick – 3 Pack
$9.99
$13.39
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Reduce splintering and tear out on your stock pieces
- Prevent small pieces from falling down in between your blade and the lower wheel
- Replace your old worn out stock insert
- Perfect for scroll work, small delicate pieces, or woods that are prone to tearing out
- This insert comes in packs of 3
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
$30.64
$37.69
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14" x 3-3/4" x 3/16" (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
Delta Uni-Saw Contractor Large Grizzly Phenolic Zero Clearance Insert for Table Saws 13-3/8” x 3-3/4” x 1/2”
$24.99
$34.74
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Insert Dimensions: 13-3/8” x 3-3/4” x 1/2”. Actual Color May Vary
- Made from high-density phenolic laminate with a bonded-melamine surface
- Delta Uni-Saw/Contractor/Large Grizzly insert fits various models of table saws.
- Includes leveling screws, side and end adjustment screws
- rear safety tab
- pre-cut blade bottom pocket
Leecraft CR-2 Sears Older 10-Inch Belt-drive Zero Clearance Table Saw Insert (Colors may vary)
FREUD D1090X Circular Saw Blade
Kreg KMS7200 Bandsaw Fence
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch(660mm) long, fence is 18 inch (457mm) long
- Incredibly strong and rigid for optimal durability and tighter workpieces
- Easy to attach and remove for less downtime and more productivity
- Adjustable in two dimensions for setting parallel with the blade
- Fits most 14-inch band saws for versatility
Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
$29.33
$37.84
Amazon.com
Last update was on: September 29, 2024 6:11 pm
- Fits: Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor, Grizzly G1023, Jet CTAS-10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685
- Measures: 13-3/8" x 3-3/4" x 1/2" (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction
- reduces chip-out and splintering
