Product description

6-1/2″ 3-Way Access Component System Power Handling: Peak: 320 watts per set / 160 watts each side RMS: 160 watts per set / 80 watts each side Woven, glass-fiber cone woofer Butyl rubber surround Aluminum inverted dome tweeter Non-resonant ABS/fiberglass basket External crossover with 3-position tweeter 4 ohms impedance 2-Layer Kapton voice coil former Top-mount depth: 2-9/16″ Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.

Amazon.com

Discover the world of Focal sound quality with the 165 A3. This 6.5-inch three-way kit adds a 4-inch midrange speaker to the A1’s offerings, so it can deliver even more Focal sound–extreme dynamics, punchy bass and accurate treble, with an expansive soundstage to fill your vehicle with crystal-clear audio. The 6.5-inch woofers boast a one-inch voice coil with excellent power handling, a high-sensitivity magnet, and butyl rubber surround for durability and powerful bass. The aluminum inverted dome tweeters provide clear and accurate treble, and can be set at three different levels using the crossovers, to provide the ideal relative volume for its install location. Experience Focal’s “Spirit of Sound” with flawless imaging, and uncommon detail and dynamics.

About the Access Line Discover the world of Focal sound quality via a range that reconciles technology, performance and affordability. The same Focal character and our philosophy of “The Spirit of Sound” is displayed by the extreme attention to detail found at every development stage for the various transducers and crossovers. The essential component in terms of quality of reproduction, richness of timbre plus image detail is the inverted dome aluminum tweeter whose inclusion represented a true challenge: how to bring a unique Focal technology into a more affordable market segment. At the same time, the woofers and subwoofers combine high sensitivity and high power handling. The humidity resistant woven glass fibre cone combines the dynamics and precision of the mid-range while offering a deep and articulated bass.

The 165 A3 kit adds a 4-inch midrange driver to the A1’s offerings, with the same construction as the woofer.

The woofer’s power handling and reliability are remarkable thanks to deliberately oversized voice coils, resulting in deep and accurate bass. Click to enlarge.

Aluminum inverted dome tweeter technology offers significant rigidity and lowers distortion. Click to enlarge.

Crossover with 3-level tweeter control. Click to enlarge.

The 165 A3 Woofer and 4-inch Midrange

The 6.5-inch Access woofer and 4-inch Midrange are both built with a light and stiff cone, coupled with a butyl rubber surround, offering a degree of quality never before encountered at this price level. The special all weather cone will perform in hot and humid environments without distortion or warping. The woofer’s power handling and reliability are remarkable thanks to deliberately oversized voice coils, resulting in deep and accurate bass.

Painted DIN chassis, 20% glass fiber filled ABS material
This strong, rigid chassis is non-magnetic and nonresonant.

All weather woven glass fiber cone
The durable, humidity-resistant cone provides dynamic bass and precise midrange.

Phase plug
Phase plug designs control midrange out of the listening axis, for added accuracy.

25mm (1″) voice coil (woofer)
Larger voice coils provide excellent power handling, which in turn provides a tight, well-defined low-end.

85mm (3-1/3″) magnet (woofer)
High sensitivity where everything begins.

Voice coil cooling system
Provides reliable, consistent performance, no matter what kind of abuse your system dishes out.

The TN 44 tweeter

Aluminum inverted dome tweeter technology offers significant rigidity and lowers distortion. Ideal air coupling, the main advantage of the inverted dome shape, allows a very wide soundstage and very accurate image, unlike a convex (traditional) dome that is moving more on its periphery than on its center, causing a weak coil/dome energy transfer.

Aluminum inverted dome tweeter
Provides accurate treble with the utmost efficiency.

20mm (13/16″) ferrofluid voice coil
Excellent power handling and heat dispersal.

Crossover

The 12/12dB/octave (300Hz-4kHz) separated Access crossover fully reflects Focal’s philosophy, which is oriented toward product application and uncompromising quality requirements. Polypropylene capacitors bring to these products high and distortion-free dynamics. Level control available in two-way systems allows refining the tuning of the tweeter in all locations.

Adjustable tweeter level
Adjust the tweeter level control according to location (3 level settings) with a simple switch.

Air core inductors
Insensitive to parasite interferences.

165 A1 Technical Specifications

About Focal

Innovation is key to the Focal sound. For 25 years, through the pursuit of constant new advances in technology, Focal has been able to develop a harmonious research and production system that enables us to continuously improve our products and introduce new ones, all with the same goal: the most faithful reproduction of music. The latest example of this philosophy has been the introduction of Beryllium in our top products, which has become a new reference worldwide.

Constantly pursuing innovation is the embodiment of Focal’s corporate strategy and that goal involves every facet of the company. From R&D to production to quality control, all our teams are fully involved and focused on this one objective: continual progress through innovation.

In today’s world, where globalization and the pursuit of chasing cheaper production methods have tempted most companies to splinter their organizations, Focal has opted to be different. Though we have grown tremendously through the years, our R & D, headquarters and manufacturing facilities remain based in Saint-Etienne (France).

We have learned that true innovation is not simply work carried out at the research department, but is also a question of comprehensive management and the direct control of the different production phases. The example of Beryllium is a significant one. Only three years ago no one was capable of producing tweeters with a pure Beryllium foil dome. Focal innovated a solution based on research and the invention of specific in-house industrial processes.

Such an approach has given us an important advantage over our competitors: we develop our own technology, which allows us to consistently provide true quality production using our own methods. In 2008, the Focal Car range gets richer with a new amplifier line: Solid. This perfectly sums up Focal’s commitment for high musical quality from the entry-level contrary to the general tendency that consists in looking for the cheapest prices in priority instead of performance.The result is music standardization and trivialization, which is highly prejudicial to sound quality. Focal cultivates this difference. This is the core strength of our brand and our company. This is the Spirit of Sound. We want to share this with you… It is our Utopia

What’s in the Box

6.5-inch Woofer (pair), 4-inch Midrange Driver (pair), Tweeter (pair), Crossover (pair), Woofer Grille, Tweeter Flush Mounting and Surface Mounting Supports, Installation hardware, Owner’s Manual

Other Focal Component Solutions

	Focal Access 130 A1 5.25-Inch 2-Way Component Speaker Kit
	Focal Access 165 A1 6.5-Inch 2-Way Component Speaker Kit

Product Description

– Maximum Power Output 2 x 2000W – Bridgeable RMS Power @ 4 Ohms: 1x4000W – 2 Channel Bridgeable MOSFET Amplifier – Frequency Response 20 Hz-50kHz (±3dB) – Output Power @ 14.4v DC, 50Hz – 2 Ohm Stable – MOSFET Power Supply – PWM ( Pulse-Width-Modulation ) System – Glass Epoxy PCB – Silver RCA Inputs – Custom Terminal Block for Speaker Connection – Thermal / Overload / Short Circuit Protection – Input Impedance: 47K Ohms – Soft Turn On/ Off – Advanced Protection Circuitry – S/N Ratio: >90dB – Dimensions:10.24″W x 2.21″H x 16.14″L

From the Manufacturer

Advanced Protection Circuitry view larger

Power Series Amplifiers view larger

System Application Diagram view larger

The Strong and not so Silent Type

Custom Terminal Block for Speaker Connections view larger

Power Amplifiers

The Pyle Power Series Amplifiers will provide your audio setup with a powerful new sound. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

This lineup of Pyle Power amps raises the bar when it comes to true sound quality. Get that sound you’ve been looking for with crisp music reproduction for any mobile audio environment.

Sound Specialization

These high-efficiency amplifiers host impressive power output wattage and are where form and function meet. Enjoy sound and performance enhancing features like Ohm specific stability, Mosfet power supply, PWM (Pulse-Width-Modulation) System, Glass Epoxy PCB, silver RCA inputs, custom terminal blocks for speaker connections, strong frequency response, and input impedance rates along with plenty more features that make the Pyle Power Series Amplifiers stronger than the competition.

Intelligent Design

Safety features include power and protection LED indicator; soft turn-on/off, thermal, overload and speaker-short protection. LED Indicator shows when the amplifier is powered up normally and when your system is experiencing a protection fault.

Pump it Up

Take advantage of the Bass EQ Boost and turn it up. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

Strong Sound – Powerful Style

The jet-black design leaves a clean finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some muscle to your audio.

Total Audio Control

Once you’re connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

• Level (Gain) Control – These are basically volume controls. This will allow you to adjust the incoming signal to the amplifier so that it works well with your headunit or to match the level of other amplifiers in your system.
• Phase – Allows you to change the relative time that the waveform meets your ear. With standard subwoofer installations where the subwoofer is behind you, the phase should generally be at O. When subwoofers or woofers are in the kick panels or door panels, an adjustment is useful in delaying the timing of the wave meeting your ear.
• High-Pass Filter – The High Pass crossover is used for sending midrange and high frequency information to a particular speaker. Activate the High Pass crossover if you intend to drive satellite or coaxial speakers in the system along with subwoofers driven by the amplifier’s channels. Even if your system does not include subwoofers, it may be helpful to activate the High Pass with smaller speakers to protect them from low frequency information to achieve better sound.
• Low-Pass Filter – Filters high frequencies out of the music and improves efficiency and sound quality by allowing only the low frequencies to pass to the subwoofer. Sends only low frequency information to particular speakers. Low Pass crossover activation is usually desired if you intend to power subwoofers.
• Bass EQ – Variable from a range of decibel adjustments, this feature regulates the impact of your bass kick. You’ll have manual control over balancing and correcting the frequency range of a given sound.
• Crossover Switch – Basically acts as a filter and limits selected frequencies going to a subwoofer, which gradually reduce frequency signal strength. Routes output of the Low Pass or the output of the High Pass filters, or ‘Full’ to the power amplifier.

*Please refer to table below for amplifier specific information and adjustment options.

Speaker Output Connections

Connect right and left speaker wire to corresponding speaker output terminals. Be sure to correctly connect the selected speaker wires to their respected speaker terminal, this includes both positive and negative wiring. Improper installation/wiring will result in the speaker cones to move out of phase which can cause bass cancellation.

Input Connections

These amplifiers have inputs for Low Level input connections. The Low Level signal is carried through RCA connection cables.

Additional Features

• Maximum Power Output 2 x 2000W
• Bridgeable RMS Power @ 4 Ohms: 1x4000W
• 2 Channel Bridgeable MOSFET Amplifier
• Frequency Response 20 Hz-50kHz (±3dB)
• Output Power @ 14.4v DC, 50Hz
• 2 Ohm Stable
• MOSFET Power Supply
• PWM ( Pulse-Width-Modulation ) System
• Glass Epoxy PCB
• Silver RCA Inputs
• Custom Terminal Block for Speaker Connection
• Thermal / Overload / Short Circuit Protection
• Input Impedance: 47K Ohms
• Soft Turn On/ Off
• Advanced Protection Circuitry
• S/N Ratio: >90dB
• Dimensions: 10.24”W x 2.21”H x 16.14”L

Which Pyle Power Series Amplifier is Right For You?

	PLA2378	PLA2678 Currently Viewing	PLA2978	PLA4278	PLA4478	PLA1800	PLA3100D	PLA4600D
Channels	2	2	2	4	4	1	1	1
Watt Power Output @ 4 Ohms	2 x 1000	2 x 2000	2 x 2500	4 x 500	4 x 1000	1 x 300	1 x 900	1 x 1200
Watt Power Output @ 2 Ohms	–	–	–	–	–	1 x 500	1 x 1200	1 x 1800
Watt Power Output @ 1 Ohms	–	–	–	–	–	1 x 700	1 x 1600	1 x 2400
Bridged @ 4 Ohms	1 x 2000	1 x 4000	1 x 5000	2 x 1000	2 x 2000	–	–	–
Maximum Output Watt Power	2000	4000	5000	2000	4000	2400	3100	4600
Low Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	60Hz – 200Hz	60Hz – 200Hz	40Hz – 300Hz	40Hz – 150Hz	40Hz – 150Hz
High Pass Cross Frequency	40Hz – 300Hz	40Hz – 300Hz	40Hz – 300Hz	15Hz – 250Hz	15Hz – 250Hz	–	–	–
Subsonic Filter	–	–	–	–	–	10Hz – 40 Hz	15Hz – 55Hz	15Hz – 55Hz
Fuse Size	2 x 15A	2 x 40A	4 x 30A	2 x 25A	2 x 40A	2 x 30A	4 x 25A	4 x 30A

A frameless wiper that delivers all-season performance by eliminating snow and ice build-up. The Si-Tech’s modern design creates more pressure points across the entire length of the blade delivering a streak-free wipe, superior visibility and smooth, chatter-free operation. Plus it features PIAA’s patented silicone rubber that continually reapplies an active silicone coating on the windshield, making the windshield water repellent. Rain simply beads up and repels off easily by wind pressure in high speed or by ordinary wiping. Make your driving experience safer with PIAA wiper blades.

This 2-channel Pyramid America amp is all you need to blast your music to new levels of American excess. No one does booming, ear-thrashing bass and sweet, mind-tweaking highs like Americans, so take your sound to the next level with this amp. It provides up to 2500 watts of pure patriotic power – or bridge this amp to one channel and push it to 5000 flag-waving watts! And you don’t need to worry about overheating – the entire thing is a heatsink. It’s equipped with a fully adjustable electronic crossovers for a multi-speaker setup, variable bass boost and gain control. Power and protection LEDs assure you your equipment is safe. Takes both high and low level inputs. THD < 0.04%.

Product Description

Pyle Model : PLMRX67

6.5” Marine Component Speakers

Dual 6.5” Water Resistant Marine Speakers, 2-Way Full Range Stereo Sound, 250 Watt, White

Features:

Technical Specs:

These 250-watt Pyle Hydra two-way marine speakers will blow you out of the water The 6.5′ high quality white speakers are constructed from a water-resistant plastic case, so they’re perfect out at sea or on land. Supported by the 35 oz. magnet structure, these speakers are equipped with a 1′ high temperature Kapton voice coil and 0.75′ neodymium dome tweeter. These speakers achieve a frequency response of 65 Hz to 20 kHz. The santoprene surround keeps your speakers secure from the elements and your sound distortion-free. Includes custom grills, mounting gasket, and installation hardware.

Amazon.com

Pyle’s Hydra series speakers are waterproof and designed for use in your boat, on the dock, by the pool, or simply mounted outside. They’re designed with rust-proof mesh covers for protection from the elements. The PLMRX67s are a pair of 250-watt, 6.5-inch, two-way speakers, suitable for marine use.

Pyle’s Hydra series speakers are waterproof and designed for use in your boat, on the dock, by the pool, or simply mounted outside. Click here for a larger image

A two-way attachable grille adds another layer of protection against the elements.

Woofer Construction

The speakers are constructed with high-quality white polypropylene cones and Santoprene rubber surrounds, boasting 250 watts peak power. Poly cones and rubber surrounds both have the added benefit of weather resistance, ideal for the marine environment.

A molded ABS plastic basket helps keep things distortion-free, and a one-inch, high-temperature Kapton voice coil delivers accurate sound reproduction.

Protective Grille

A two-way attachable grille adds another layer of protection against the elements (not to mention the inevitable bumps and scratches from in-boat enjoyment).

.75-Inch Tweeter

A .75-inch Neodymium dome tweeter takes up the high-end, helping to ensure full-range sound with minimal distortion.

PLMRX67 Select Specifications

Power Rating:	250 Watts Peak
Impedance	4 Ohms
Frequency Response:	65Hz – 20kHz
Sensitivity:	90 dB
Magnet:	35 oz.
Voice Coil:	One-Inch Kapton
Mounting Depth:	2.55 Inches

What’s in the Box

Pyle PLMRX67 Speakers (Pair), Mounting Hardware, Wires, Documentation

PylePro Model : PDMR6

6.5” High Power Midrange Driver

6.5” High Power High Performance Midrange Driver

Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see – and hear. Pyle Drivers are all manufactured with a close attention to detail, and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. The Pyle PDMR6 is a high performance driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet.

Product Description

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Amazon.com

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Solid car audio without the huge price tag. Click to enlarge.

View output diagram.

View input diagram.

Bridgeable
Delivers two channels or bridge mono for subwoofers. The PB171X cranks out 2 x 50 watts RMS at 4 ohms and is 2-ohm stereo stable for 75 watts x 2.

Selectable Crossover Modes
The built-in crossover can be set to full for normal full-range systems, or low-pass/high-pass for delivering specific frequencies to components or subwoofers. Low-pass and high-pass frequency controls are provided for setting the crossover frequencies.

Input Versatility
The PB717X includes both high-level and low-level inputs, so you’re covered with the various types of car stereos. The high-level inputs take direct speaker wire leads, while the low-level use RCA plugs.

To further match the amplifier to your receiver/head unit, a variable input level control is provided to dial in the perfect setting without distortion.

Bass Boost
Subwoofer fans rejoice: The PB717X features a bass boost of up to 18 dB, for added rumble.

MOSFET Power
The MOSFET pulse width modulated power supply helps provide excellent sound quality, minimal distortion, and efficient power handling.

Comprehensive Protection
High-performance audio requires a lot of power, and things can get hot quickly. Like any solid car amplifier, the PB717X features protective circuits. Overload and thermal indicators let you know they’ve activated and shut off the amp. In the event of a short circuit, power protection is provided in the form of easily replaceable fuses.

PB717X Specs

What’s in the Box

Pyramid PB717X power amplifier and user’s manual.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Alfa Romeo Guilia So Good, eg:

• What are Top 10 Alfa Romeo Guilia So Good for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Alfa Romeo Guilia So Good to buy?
• What are Top Rated Alfa Romeo Guilia So Good to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Alfa Romeo Guilia So Good?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Alfa Romeo Guilia So Good.
• Before deciding to buy any Alfa Romeo Guilia So Good, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Alfa Romeo Guilia So Good and What you should consider when buying the Alfa Romeo Guilia So Good and Where to Buy or Purchase the Alfa Romeo Guilia So Good. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Alfa Romeo Guilia So Good of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Alfa Romeo Guilia So Good.