Best craftsman drill press pulley
Deal Score0
Deal Score0
Best results for craftsman drill press pulley
WEN 4214 12-Inch Variable Speed Drill Press
$272.49
$397.84
Last update was on: October 31, 2024 10:06 am
- Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
Chicago Die Casting 1416 V-groove 4-step Pulley, 5/8"
NEW After Market BELT Craftsman 15 1/2, 1/2hp motor Drill Press w/45 inch 3/16 top width
Grizzly T21992 Power Twist V-Belt, 1/2-Inch x 4-Foot
Grizzly G2535 Single-Phase Motor with 3450 RPM
$250.95
$351.33
Last update was on: October 31, 2024 10:06 am
- All our motors are standard NEMA 56 frames and fit over 90% of the woodworking machinery on the market.
- Size: 1-1/2 hip
- Type: Enclosed
- Made to demanding specifications these motors feature the same quality as the motors we install in our heavy-duty machines.
AUSPA 5ft Power Twist V-Belt, 1/2-Inch x 5 Feet (A Type)
$39.99
$57.19
Last update was on: October 31, 2024 10:06 am
- Durable material – Special PU linked belt made by polyurethane and polyester composites
- Good performance on reducing vibration & Low elongation than other normal belt.
- Perfect for lathes, table saws, bandsaws and other woodworking tools
- Easy to install
- What you can get: 1x AUSPA V-Belt (1/2-Inch x 5 Feet)
Jason Industrial A-LINK-5 Accu-Link V-Belt Belting, 1/2 inch
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$105.53
Last update was on: October 31, 2024 10:06 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
WEN 4210T 10 In. Drill Press with Laser
$152.45
$192.09
Last update was on: October 31, 2024 10:06 am
- Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
- Adjust between five speeds from 600 to 3100 RPM
- Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Durable 3.2-amp motor provides ample torque and power
- 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right
2.5" X 5/8" Single Groove Fixed Bore "A" Pulley # AK25X5/8
General International 75-010 M1 Bench-Top Drill Press, 12", Green
$321.99
$479.77
Last update was on: October 31, 2024 10:06 am
- Forced opening line interrupter switch, requires machine restart in case of power failure or circuit interruption
- Adjustable spindle tension return spring
- Built-in laser pointer
- Sturdy design with case-iron head, base and table
- High-quality bearings for smooth
Keyless 1/32"- 5/8" Drill Chuck With Morse Taper #2 MT2 Arbor
RS-550s 18v (6v – 24v) DC Motor – Round Shaft High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicles, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine & More
$16.99
$20.56
Last update was on: October 31, 2024 10:06 am
- RS-550s Brushed DC Motor Weight: ~7.7oz (218g) Body Length: 2.24in (57mm) Body Diameter: 1.46in (37.5mm)
- Operating Voltage: ~6v - 24v | Optimal Volt Range: 12v - 18v | 18 Volt Nominal (Optimal Power, Speed, and Torque near 18 volts)
- Shaft Length ~0.35 inch / ~11/32in or ~9mm | Diameter ~0.125 inch / 1/8in or ~3.175mm | Style: Round | Stall Current: ~85A | Efficiency: ~70% | No Load RPM: ~20000 rpms | RPM Peak Efficiency: ~17000 rpms
Eazypower 81042 5/8" or 1/2" Motor Arbor Adaptor RH Thread (1-Pack)
Accu-Link® Adjustable Link V-Belt, 4L or A Profile, 1/2" Width, 4ft Length
$35.99
$47.15
Last update was on: October 31, 2024 10:06 am
- Replacement for Power Twist Plus V-Belt, 1/2-Inch x 4-Foot
- Accu-Link detachable tab type link belting is the ideal substitute for conventional rubber V-belts. Make endless with a simple twist – no tools required! Polyester fabric is impregnated with a premium polyurethane compound that eliminates elongation and improves tensile strength for longer life.
- Jason/Megadyne’s exclusive manufacturing process makes Accu-Link the most precise belt of its type, for optimum sidewall fit with the pulley.