goldstarkitchen 
Best results for dewalt nail gun d51256
DEWALT DCN680D1 Cordless Nailer Kit
$249.00
$293.82
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Diagnostics with LED indicator Communicates battery charge status: charged
- Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
- Automatic shut-off protects excessive discharge of vehicle's battery
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
DEWALT DCN650B Nailer Angled Finish 20V 15Ga
$299.00
$415.61
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Highly durable, portable and stackable solution designed to supply crisp
- 4 full range tweeters, 1 Subwoofer and 1 Assisted Bass resonator
- IP54 rated for water and dust resistance
- Compatible with all DEWALT 20V MAX batteries
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
DEWALT DWFP12231 Pneumatic 18-Gauge 2-Inch Brad Nailer Kit
$98.69
$143.10
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Long life maintenance-free motor to keep from staining the work surface
- Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
- Tool-free jam release mechanism for easy nail removal
- Rear exhaust to keep contaminates away from work
- Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic
DEWALT DWFP12569 2-N-1 Flooring Tool
$229.00
$341.21
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Lightweight at 10.6 lbs for better balance and control
- Optimized for the most popular solid flooring fasteners, 15.5ga Staples and 16ga “L” Cleat Nails
- Interchangeable, Non-marring base plates adjust to all sizes of flooring
- Ergonomically designed with longer handle and comfortable rubber grip for ease of use
- Lower CFM requirements for less compressor run-time
DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit – DWC1KITB
$229.99
$319.69
Amazon.com
Last update was on: November 24, 2024 3:53 am
- DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
- DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
- Tool-free depth-of-drive adjustment and tool-free jam release
- Low 75.5 dBA for a quiet work environment
- Kindly refer user manual for instructions.
DEWALT D51257K 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer
$181.99
$262.07
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Sealed lube dual tech: motor works as an oil free and oil lube unit.
- Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
- Uses 1-inch to 2-1/2-inch (25.4 milimeter-65 milimeter) 16 gauge straight collated nails,
- Includes carrying case and sample finish nails ( safety glasses are not included.)
- Low profile no-mar pad
- Sequential action trigger installed
DeWalt DWFP72155 15 Gauge Precision Point "DA" Style Angle Finish Nailer
$188.00
$219.96
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Tool-free jam release mechanism for easy nail removal
- Selectable trigger: sequential or contact actuation
- Adjustable belt hook allows the tool to be kept near the user
- Tool-free depth-of-drive adjustment for proper setting of nail heads
- Integrated air blower allows to clear away debris from work surface
DEWALT DCN680B 20V Max XR 18 Gauge Brad Nailer
$249.00
$288.84
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Diagnostics with LED indicator Communicates battery charge status: charged
- Automatic shut-off protects excessive discharge of vehicle's battery
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
DeWalt N566148 Trigger Valve Assembly
DEWALT DCN660D1 Cordless Angled Finish Nailer Kit
$343.00
$445.90
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free jam release to quickly and easily clear nail jams
- Easy to use
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
DEWALT DCN660B 20V 16 Gauge 20° Finish Nailer
Dewalt DW66C-1R 15 Degree 2-1/2 inches Coil Siding Nailer (Renewed)
$234.99
$331.34
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Drives wire and plastic coil nails for added versatility and application
- Tool-free depth of drive adjustment allows precise countersinking of staples quickly and easily
- Adjustable air exhaust port keeps exhaust out of users face and away from work piece
- Lightweight aluminum construction provides increased durability and reduced fatigue during use
- High wear components such as drivers, bumpers and springs extend tool life and longevity
DEWALT DG5121 Heavy-Duty Impact Driver Holster
$12.95
$18.39
Amazon.com
Last update was on: November 24, 2024 3:53 am
- ADJUSTABLE IMPACT DRIVER: This CLC impact driver holster has an adjustable strap and quick release buckle to hold drill securely in place.
- DURABLE IMPACT DRIVER HOLSTER: Ballistic poly material provides strength and durability for this impact driver holster.
- KEEP IMPACT DRIVER SECURE: The hook and loop back on this impact driver holster keeps strap back when not in use.
- ANGLED IMPACT DRIVER HOLSTER: Angled holster provides better drill balance
DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch – 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Amazon.com
Last update was on: November 24, 2024 3:53 am
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Contact Trip Lock-Off allows trigger to be disabled when not in use. 20-degree angled magazine (up to 120 nail capacity) and will accept DEWALT and most other 20-degree angled finish nails
DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch – 6-Inch)
$12.25
$17.76
Amazon.com
Last update was on: November 24, 2024 3:53 am
- DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel
- DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel
- All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes
- All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability
