goldstarkitchen 
Best results for drill bit grinding attachment
Forney 60053 Mounted Grinding Stone with 1/4-Inch Shank, 2-Inch-by-1/2-Inch
General Tools 825 Drill Grinding Attachment
$24.38
$35.59
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- The General Tools and Instruments 825 Drill Grinding Attachment extends the life of your drill bits by sharpening them back to factory tolerances
- The angle adjustment gauge allows you to match the point angle of nearly any bit, and even works on countersinks
- Designed with a pivoting neck for simple grinding of both sides of the bit
- The Drill Grinding Attachment is intended for use with ANSI, OSHA and UL approved standard electric bench grinders or surface grinders
Drill Bit Sharpener Tormek DBS-22 – The Drill Bit Sharpening Jig Attachment For Tormek Water-Cooled Sharpening Systems.
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- 4-facet point brings the point to a chisel edge that will not walk and bores round, straight holes with close tolerances
- The always equal two cutting edges are sharpened symmetrically and work in perfect unison which prolongs the life of the drill
- Sharpens all point angles between 90 and 150 degrees
- The optimal clearance angle can be set according to each drilling requirement to 7, 9, 11, or 14 degrees
Ginode 6mm Rotary File Burr Cutter, 6Pcs Tungsten Steel Rotary File Cutter, 1/4" Shank Engraving Grinding Drill Bit, For Metal Plastic Wood Grinding
$9.99
$13.49
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- ▲1/4" (6mm) SHANK - 1/4'' shank fits all drills.
- ▲TUNGSTEN STEEL MATERIAL - Precision cutting edges will not clog or load up, machining hardness reach ≥ HRA85.
- ▲CROSSOVER LINE DESIGN - not easy to block the lines, more suitable for the object of relatively low density material.
- ▲WIDE APPLICATION - Used for fine carving resin, plastic, ceramic, soft metal and stone, fine polishing woode and bone, etc.
CZS Drill Bit Sharpener Portable Diamond Drill Bit Sharpening Tool Corundum Grinding Wheel for Iron-based Drill Bits Fit Width Range 5/64”-1/2” (2-12.5mm),One Extra Corundum Grinding Wheel and Wrench
$10.39
$14.34
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- 【Application】This diamond Drill Bit Sharpener is mainly used for grinding iron drills, not suitable for other high hardness drills.
- 【Easily Increase the Life of Drill Bits】Forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Improve the utilization of drill bits, solve the troubles you have been buying drill bits, save time and save money.
Drill Doctor DD500X500x Drill Bit Sharpener, Professional Design & Construction for Durability with Industrial-Strength Diamond Sharpening Wheel, Set Point Angles at 118° & 135°, Sharpens 3/32" to 1/2" standard twist bits
Woodstock D4144 Drill Sharpener
Vermont American 16710 3/4-Inch by 1-1/4-Inch Useable Length Cylinder Metal Grinding Point
Drill Doctor DD350X 350X Drill Bit Sharpener
$49.26
$57.14
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- SHARPENS STANDARD DRILL BITS – from 3/32" to 1/2" standard twist bits. Ideal for shops that use the most common bit styles & is compatible for use with wood and light metals
- PROFESSIONAL DESIGN & CONSTRUCTED FOR DURABILITY - industrial-strength diamond sharpening wheel that won't change shape over time, & a cool design so bits don't heat up and lose their tempering as you sharpen them
- TWO EASY STEPS - eliminates the need for alignment port & simplifies the sharpening process, making the 350X a perfect choice for home workshops. Simply secure the bit & turn the chuck an even number of half turns to achieve a perfect 118° angle. V-block jaws hold the bit precisely in place & ensure that you don't have to worry about jaw twisting, even when working with small bits
Forney 72417 Grinding Stone, Cylindrical with 1/4" Shank, 2-1/2" by 1/2"
$10.67
$12.48
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide
- Perfect for grinding, polishing or deburring ferrous metals
- Use with 1/4 inch chuck for high speed drills
- Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly
- Max RPM is 3,450
Drill Doctor 750X Drill Bit Sharpener
$133.98
$152.74
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often
- CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, a unique BACK-CUT split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to
51 Piece Drum Kit -45 Sanding Bands, 6 Mandrills, Fits Dremel & Any Drill -For Rotary Tools, Die Grinder, Power Drills, Carpenters, Woodworking, Paint, Sanding Surfaces, Finishing Jobs – By Katzco
$9.99
$10.99
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- QUALITY- Katzco drum sanding kit is of utmost quality and has 120 grit bands ideal for long term use on all types of surface preparation and surface finishing work. Mandrels are also made of high quality rubber.
- VARIETY- That Katzco drum sanding kit comes with a total of 51 pieces that include sanding bands, rubber mandrels, and shanks of all of the three different sizes that the kit provides. Incredible variety to fit all of your sanding, surface prep and wood finishing needs
Century Drill and Tool 76221 Coarse Drill Cup Wire Brush, 2-3/4-Inch
$10.41
$14.37
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- Wire brushes are used to remove rust paint and weld spatter on all types of metal parts or surfaces
- Deburr and clean the inside and outside of pipes valves and other fittings
- Perfect for cleaning engine heads and components
- 1/4-Inch hex quick change shanks are use in all Types of drills and die grinders
- Type of wire is crimped
HOYIN 6Piece Wire Wheel Cup Brush Set|0.0118In Coarse Crimped Carbon Steel|1/4In Round Shank|for Drill
$8.99
$12.23
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- Removing weld scale spatters,extra-heavy rust and corrosion, paint and dirt and glitch from metal and other surface.
- Use for surface roughening,for adhesion and finsish preparation perior to plating or painting,stripping paint from surfaces like wood.
- For use on steel and finish preparation.
- 0.0118 in. carbon steel crimped wire for longer life.
- For operation at speeds up to 4,500RPM,1/4 in. shank suitable for drill.
Katzco Wire Wheels Brush – 2 Pack Knotted & Crimped Cup For rust removal, corrosion and paint. Hardened steel wire for reduced wire breakage & longer life
$12.99
$17.41
Amazon.com
Last update was on: May 18, 2024 10:21 pm
- WHAT IS IT: 1pc 3 Inch brass plated, crimped wire cup brush & 1pc knotted steel wire cup brush. Ideal for removal of rust, corrosion and paint. 1/4" shank fits all drills. Hardened steel wire for reduced wire breakage & long life. Maximum 4500 RPM.
- VERSATILE: This product is suitable for multiple uses. Keep one in your car, garage, office and kitchen and have 100% satisfaction.
- PROFESSIONAL RESULTS: Innovative spiral knotted wire construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation.
