goldstarkitchen 
Best results for drill press spindle wobble
WEN 4208 8 in. 5-Speed Drill Press
Amazon.com
Last update was on: June 23, 2025 3:22 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
WEN 4210 Drill Press with Laser, 10-Inch
Amazon.com
Last update was on: June 23, 2025 3:22 am
- Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
- Adjust between five speeds from 600 to 3100 RPM
- Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Durable 3.2-amp motor provides ample torque and power
- 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right
1/32"- 5/8" Heavy Duty Drill Chuck with Chuck Key and MT2 Shank
3" x 6" SLEEVELESS SANDING DRUM By Peachtree Woodworking – PW122
DEWALT DCD785C2 20V MAX Lithium Ion Compact 1.5 Ah Hammer Drill/Driver Kit
Amazon.com
Last update was on: June 23, 2025 3:22 am
- N/A
- Made in USA
- Dewalt 20V DCD785C2 Max Lithium Ion Compact Hammer drill Kit 1.5Ah
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
- Compact, lightweight design fits into tight areas
- High speed transmission delivers two-speeds (0-600 and 0-2,000 rpm) for a range of fastening and drilling applications
South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck
Woodstock D2737 0 to 1/2-Inch JT6 Taper Drill Chuck
WEN 4214 12-Inch Variable Speed Drill Press
Amazon.com
Last update was on: June 23, 2025 3:22 am
- Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
Einstein Tool Co. 1/2" JT33 Drill Chuck 2 MT Arbor/Mount for Lathes and Drill Presses Two Keys
16pk Sanding Drum and Sleeves Set for Drill, 2-inch Long
Amazon.com
Last update was on: June 23, 2025 3:22 am
- Extra long drum sanding set converts your drill or drill press into a mini spindle sander
- Ideal for use to smooth out rough edges and cuts
- Sand the inside surfaces of deep drilled holes.
- Clean up bandsaw marks on contour cut
- Check out the description bellow for whats included
HHIP 1/32-1/2 INCH JT33 Drill Chuck with Key (3700-0102)
uxcell 1/32 inches-1/2 inches Keyless Drill Chuck Light Duty, JT33 Taper Mount
Amazon.com
Last update was on: June 23, 2025 3:22 am
- Clamping Capacity: 1/32-inch -1/2-inch (1-13mm)
- JT33 Taper Mount, Light Duty. Clamping Taper: mt2, mt3, mt4, mt5
- Accuracy: 0.003-inch ~ 0.005-inch (0.08~0.12mm)
- Self-tightening, key-less. Run Out: 0.005-inch (0.12mm)
- Widely used along with various drill machines, milling machines, lathes, boring lathes and electric hand tools.
