goldstarkitchen 
Best results for variable speed floor drill press
WEN 4214 12-Inch Variable Speed Drill Press
$272.49
$367.86
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
- Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press, 15-Inch
$541.71
$709.64
Amazon.com
Last update was on: November 23, 2024 4:52 am
- 4-inch stroke makes drilling through 4x4 boards easier than ever
- Adjust the variable speed anywhere from 280 RPM to 3300 RPM
- Includes a built-in work light, a precision laser, a 5/8 inch chuck, and onboard chuck key storage
- 12-inch by 12-inch cast iron work table pivots up to 45 degrees in both directions
- Backed by a 2-year warranty, a friendly customer service line and a nationwide network of skilled technicians
Klutch Floor Drill Press – 16-Speed, 13in. 3/4 HP, 120V
$309.99
$412.29
Amazon.com
Last update was on: November 23, 2024 4:52 am
- 5/8in. chuck capacity with 1in. maximum drilling capacity
- 3 1/4in. vertical stroke
- 13in. swing adds versatility
- 45 degree table tilt offers a multitude of drilling angles
- Depth lock with a ball knob handle for precise adjustments that stay true, hole after hole
JET J-A5816 15-Inch 1-Horsepower 115/230-Volt Single Phase Variable Speed Floor Drill Press
JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press
$670.00
$777.20
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Cast iron head
- Large quill allows greater accuracy
- Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
- Table tilts 45°
- Large ground steel column diameter for maximum head and table support
RIKON Power Tools 30-217 1.5 hp VS Drill Press
WEN 4288 Cast Iron Bench Grinder Pedestal Stand with Water Pot
$39.97
$53.56
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Heavy-duty cast iron and steel construction prevents walking and wobbling during operation
- 9.9-inch by 12.4-inch steel mounting plate accommodates a variety of bolt orientations
- Measures in at 31.5 inch height with an onboard water pot to cool down projects
- Compatible with the entire line of WEN Bench Grinders
- Universal design fits the majority of bench grinders on the market
BLACK+DECKER BDEJS600C Smart Select Jig Saw, 5.0-Amp
SKIL 6335-02 7.0 Amp 1/2 In. Corded Drill
$39.13
$43.43
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Poweful 7.0 amp motor for tough applications
- 1/2 in. keyed chuck to accept large diameter bits designed for woodworking and cutting
- Side assist handle for controlled, accurate drilling
- Variable Speed trigger for controlled drilling speed
Skil 6445-04 7.0 Amp 1/2 in. Hammer Drill
$42.74
$59.41
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Powerful 7.0 amp motor for tough applications
- 1/2 in. keyed chuck to accept large diameter bits designed for woodworking and cutting
- Side assist handle for controlled, accurate drilling
- Variable Speed trigger for controlled drilling speed
WEN 4208 8 in. 5-Speed Drill Press
$81.18
$99.85
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
JET 354170/JDP-20MF 20-Inch Floor Drill Press
$1,153.90
$1,719.31
Amazon.com
Last update was on: November 23, 2024 4:52 am
- 20 inch floor drill press with a powerful 1.5 hp motor
- Smooth traveling table raises and lowers at the turn of a crank to exactly where you need it
- 12 spindle speeds ranging from 150 4200 rpm
- 3/4 inch chuck
- Built in work light
- drill chuck and key included
JET J-2500 15-Inch 3/4-Horsepower 115-Volt Floor Model Drill Press
WEN 4210 Drill Press with Laser, 10-Inch
$175.32
$226.16
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
- Adjust between five speeds from 600 to 3100 RPM
- Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
- Durable 3.2-amp motor provides ample torque and power
- 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right
General International 75-010 M1 Bench-Top Drill Press, 12", Green
$321.99
$447.57
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Forced opening line interrupter switch, requires machine restart in case of power failure or circuit interruption
- Adjustable spindle tension return spring
- Built-in laser pointer
- Sturdy design with case-iron head, base and table
- High-quality bearings for smooth
Oreck Commercial ORB550MC Commercial Orbiter Floor Machine
$335.98
$450.21
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Floor buffer used for cleaning wood, vinyl, tile, and other hard floors and for dry-cleaning and loosening dirt from carpeted floors
- Orbital drive oscillates the brush or pad (sold separately) at up to 175 RPM to buff, clean, polish, sand, scrub, strip, or wax floors without twisting, marking, or gouging
- 50-foot power cord enables the floor machine to cover larger area without changing outlets than machines with shorter cords. Surface Area - Carpet, Hard Surfaces
DEWALT DWE1622K 2-Speed Magnetic Drill Press, 2-Inch
$777.98
$871.34
Amazon.com
Last update was on: November 23, 2024 4:52 am
- 10 amp motor, 2-speed settingsl
- No Load Speed : 300/450 rpm
- Overload protection electronics which prevent motor damage
- Quick Change chuck system
- Magnetic coolant bottle can be placed on either side of tool or on a work surface
- 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications
ShopSeries RK7033 6.2-Amp 10" Drill Press
$162.91
$211.78
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Powerful 6.2-amp drill press ideal for repetitive precision cutting in materials such as wood, plastic, and metal
- Durable cast iron work table bevels up to 45 degrees left and right
- Features five operating speeds ranging from 620 to 3100 rpm
- 1/2˝ drill chuck allows for the use of woodworking and metal drill bits with up to a 1/2˝ shank
- 2 year limited warranty protects against defects in materials and workmanship
Milescraft 1312 DrillBlock- Handheld Drill Guide
$7.08
$9.35
Amazon.com
Last update was on: November 23, 2024 4:52 am
- Centerlines ensure accurate alignment when drilling into various surfaces
- Non-slip feet holds the DrillBlock in place while preventing both slipping and marring on wooden work pieces
- The two product v-grooves allow for usage on corners and even cylindrical surfaces too
